change currency to:
Euro
Złoty

half-WIPLUG


price: 4.40 USD
THIS PRODUCT IS DISCONTINUED
AND WILL NOT BE AVAILABLE AGAIN

When MIDIfying an old equipment, it is sometimes better to leave existing wiring as they are, and just cut the old circuit boards. To simplify reconnection of old contact wires to MIDI scanner, you may now use the half-WIPLUG adapter, that nicely fits onto 16-way pin headers in all of the boards sold in this website. Below is one example of MBBS partially filled with half-wiplugs

You need 1 half-WIPLUG for each 16 inputs, so 2 for BBSP or DMS-2K, 3 for LITSW, 4 for BBS-1K and MBBS. They accept solid or stranded wire of the size 20 to 24AWG (0.14 - 0.5mm2) and no tools or soldering are required to make fast and secure connections. The wires should be stripped at about 9mm. If this is solid wire, just push it inside untill it stops. With stranded wire use screwdriver, pen, or fingernail to push the lever down, insert the wire, and release lever.

Email for details