change currency to:
Euro
Złoty

PotsTail


price: 3.30 USD
where is Add-to-Cart button?

To make your life easier, here's premade cable matching analog inputs connector in PDS and BBSP boards. The cable is 26AWG ribbon cable (thicker than usual for easier soldering), around 30cm long, ideal for soldering potentiometers or voltage sources. At one end there's 12-way plug red MicroMatch, matching analog inputs header on BBSP and PDS
The cables are of limited length, because that's the recommendation for unshielded wires going to analog inputs. It may be longer if source (pot) resistance is less than 20k. In all other cases it is strongly recommended to use this tail only as help to attach shielded cable of your prefered length. Typical microphone cable is perfect for this, using shield as ground connector, one of the inner wires as pot's top end, and the other one as pot's wiper.

The pinout in PDS and BBSP analog connector is made in such a way, so it's easy to split the ribbon cable in 4 strips and lead wires to each potentiometer or expression socket individually. Like in this example with 2 pots and one header for Fater expresion pedal.

Email for details