change currency to:
Euro
Złoty

PEDSCAN


TEMPORARY UNAVAILABLE
price: 38.50 USD
where is Add-to-Cart button?

This little board is a scanner of up to 32 contacts, translating their closings into MIDI notes. In addition it can take one analog input, like potentiometer, to add one Continuous Controller like swell or volume. Typical application is MIDI controller for pedalboard in organ consoles, where it can take 32 keys and swell pedal. The board shown above has 12-way socket to be plugged onto typical 0.1'' spacing pin header. If you wish, there's possibility to solder a cable or another header at the bottom side, where 12 soldering holes are provided. This is for 4x8 diode matrix. 3 pads on the side are for the potentiometer, and 3-pin at the bottom connector for MIDI output. Proper cable with DIN5 jack is supplied with the board. Four rectangle pads at bottom edge are for soldering wires to power supply (+ -) and momentary button to enter user settings (SET). The "SET" button alows the user to change every settings of the controller, like MIDI channel, split, or the type of controller assigned to the potentiometer.
PEDSCAN is designed to be held in place just by the means of 12-pin header, but if needed, there's small hole of 2.5mm diameter at the edge, so the board can be attached to something by very small screw. Watch out not to short anything on PEDSCAN board with the screw.


Features:

  • scans 32 contacts organized in array of size 4x8
  • user defined split point
  • user defined MIDI channel for the keyboard/split and pot
  • user defined MIDI event type for the keyboard/split and pot
  • user defined transposition for each split
  • Program Change using note contacts as numeric entry
  • all settings stored in nonvolatile memory.
  • MIDI DIN cable, with matching plug to the board included
  • requires 5-12V DC power supply, about 1mA current consumption.
  • auto-power-off reduces power consumption for long battery operation
  • dimensions: 29x31mm (1.1''x1.2'')
  • more marketing talk


You may be interested also in the following products (click the image for more info):
REED32 magnetic reed switch board for easy instalation of pedal contacts
REED32WIDE same as above but for wider spread pedals

download user manual

Email for details